17
9. ASSEMBLY
9.6 FLEXIBLE DRIVE SHAFT ACCESSORY
INSTALLATION – FIGS.6 – 7:
The flexible drive shaft attachment
of the bench
grinder is designed for use with 1.9, 2.3 & 3.0mm
shank accessories only.
Warning:
Use bits of the correct shank diameter
suitable for the speed of the tool.
Selection of the correct accessory, suitable for the
intended application is vital. Seek guidance if
uncertain of selection.
– Using the spindle locking key
, slot the key into
the aperture located on the the hand grip of the
flexible drive shaft
.
– When the key is correctly slotted in place the
driveshaft is locked, enabling the chuck cover to be
removed.
– Use
the
spanner
provided to unscrew the chuck
cover.
– Insert a correctly sized collet into the spindle. The
collet which offers a machine fit to the shank is the
correct one to use
– loosely replace the chuck cover
.
9.5 FITTING THE FLEXIBLE DRIVE SHAFT –
FIGS.4 – 5:
Note:
Remove the plug from the socket before
carrying out adjustment, servicing or maintenance.
– Thread the inner flexible drive shaft
into the
square profiled recess on the drive spindle
.
– Screw the threaded shaft cover
onto the drive
housing located on the right-hand wheel cover
.
FIG.4
FIG.5
FIG.6
FIG.7
