20
10. OPERATION & USE
10.2 USING THE POLISHING WHEEL – FIG. 12:
– If necessary, follow the instructions outlined in section 9.4 on page 16 for attaching the
polishing wheel to the machine.
– The polishing wheel can be used for polishing and buffing applications in conjunction
with the supplied polishing compound and polishing discs used with the flexible drive
shaft.
Polishing tips
– Constantly vary the direction of polishing.
– Use metal polishing compounds sparingly to avoid
smudges of black grease.
– If possible, always polish across marks or scratches
and not along them.
– Before polishing, remove any lacquered surfaces
from the workpiece with paint remover.
– Don’t mix different polishing compounds on the
same wheel.
– A slight coating of grease and finger marks can
often be seen on the workpiece after polishing.
This can be removed using Vienna Lime Powder and a soft polishing cloth.
– Protect the final polished workpieces with a coat of good quality wax polish.
FIG.12
10.3 USING THE FLEXIBLE DRIVESHAFT &
ATTACHMENTS – FIGS.13 – 14:
– For jobs such as milling or engraving where
precision is required, hold the multi-tool like a pen.
– For heavier work like cutting or grinding hold the
multi-tool in the palm of your hand.
FIG.13
FIG.13
FIG.14
