IN742400AV 10/12
© 2012 Campbell Hausfeld/Scott Fetzer
For parts, product & service information visit
www.campbellhausfeld.com
Model: Cl252100AV, Cl254100AV
Description
Air die grinders are designed for grinding, polishing, deburring and smoothing sharp
edges. This tool may be used with carbide burrs. Multiple collet sizes are available to
allow use of standard grinding accessories. Angled head models allow access to tight
or difficult to reach areas.
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred
during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.
Read & Follow all InstRuctIons
save these InstRuctIons
do not dIscaRd
Safety Guidelines
This manual contains information that is very important to know and understand. This
information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To
help recognize this information, observe the following symbols.
Danger indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.
Warning indicates a potentially hazardous situation which, if not
avoided, COULD result in death or serious injury.
Caution indicates a potentially hazardous situation which, if not
avoided, MAY result in minor or moderate injury.
Notice indicates important information, that if not followed, may
cause damage to equipment.
NOTE:
Information that requires special attention.
General Safety Information
calIFoRnIa pRoposItIon 65
This product or its power cord may contain chemicals, including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after handling.
Operating Instructions
Air Die Grinders
