46
VIEWING RECORDED DATA
DranXperT data files are stored in a json (JavaScript Object Notation) file
format and have a “.json” file extension. Dran-View XP software is used
to view and analyze data recorded by DranXperT. In order to do so, you
must first copy the DranXperT data files to your computer. Please follow
the steps below:
Copying Data from DranXperT
There are 2 ways to copy data to your computer for analysis using Dran-
View XP software.
1) Download data to a computer using your web browser – see the
Downloading and Managing Data
section above.
2) USB drive – DranXperT data can be automatically copied to a
USB drive by following the steps below:
a. Turn off monitoring – see the Start/Stop Monitoring
section above. Data cannot be copied to a USB drive
when monitoring is ON.
b. Insert a USB drive into the USB port.
c. DranXperT will automatically begin copying all data files
to the USB drive. The 6 measurement input LEDs will
blink GREEN while data is being transferred to the USB
drive.
d. The data transfer has completed when the measurement
input LEDs stop blinking GREEN.
e. When the transfer is complete, remove the USB drive
from DranXperT.
f. Insert the USB drive into a USB port of the computer
running Dran-View XP and then follow the instructions
below to open a data file.
Opening Data in Dran-View XP
To view data files in Dran-View XP:
1) Start
Dran-View
XP.
2) Select
“File”
and
then select “Open”.
3) Locate and select the data file of interest and select “Open”.
The
data file can be located on your computer, external USB drive,
network folder, etc.
