14
CONNECTING TO DRANXPERT
A web browser is the only software needed to configure DranXperT
for
use and to download data for analysis and reporting by Dran-View XP.
To
connect to DranXperT, you must know its IP (network) address and
password. Also, both the computer and the instrument must be properly
configured for use on the intended networks. Once properly configured
and connected to the network, simply launch a web browser on your
computer, tablet, or smartphone and enter the instrument’s IP address to
communicate with DranXperT. Please contact Dranetz or your IT
department for assistance.
The factory default network settings are:
IP Address: 192.168.0.40
Username:
admin
Password:
Dranetz
Notes when using the default IP address:
If you intend to use DranXperT directly connected to a computer, or on a
small (un-routed) private network, it may be sufficient to use the default
instrument IP address. Note that your computer must be configured for
use on the same network (192.168.0.xxx) as DranXperT. Please contact
Dranetz or your IT department for assistance.
Notes when using DranXperT on a corporate, public, or other
network:
If you intend to use DranXperT on a routed, corporate, or other network,
including the Internet, you may have to modify DranXperT’s network
settings for use on that network. To change the network settings, you
must first establish a one-time connection to DranXperT using the default
IP address to change the settings. Please contact Dranetz or your IT
department for assistance.
See the Instrument Settings section below to change the IP address of
DranXperT.
