33
Ethernet
Please contact Dranetz or your IT department for network setting
assistance.
DHCP
– Checkbox enable/disable. If enabled, an IP address will be
automatically assigned to the instrument by the network. The IP address
assigned can be viewed in the Home/Instrument Status page.
IP Address
– Instrument static IP address. The default static IP address
is: 192.168.0.40. Enter a valid IP address for the network being used.
Subnet Mask
– Network subnet mask. The default is 255.255.255.0.
Enter a valid subnet mask for the network being used.
Gateway
– Network gateway setting. Enter a valid gateway for the
network being used.
Date and Time
Note: The time and date of data stored in the DranXperT database is
recorded in UTC time. By setting the local time zone offset (below), the
data will appear in DranXperT and Dran-View XP in the local time zone.
Date and Time
– Click in the date/time entry area to open up a dialog
box to enter the local time and date. Click the
Change Date/Time
button
when completed.
DST Enable
– Checkbox enable/disable. Enable or disable Daylight
Savings Time.
Time Zone Offset
– Dropdown. Select the local time zone.
Input Channels (LED colors)
You can change the color of the connector panel LEDs to match the
circuit’s wire colors.
Channel A Color
– Dropdown list. Default channel A LED color is RED.
Channel B Color
– Dropdown list. Default channel B LED color is
YELLOW.
Channel C Color
– Dropdown list. Default channel C LED color is BLUE.
