Quick Reference Guide 45
Most front panel pushbuttons perform two functions. The
second function requires that the
NUM
*
button be
pressed first, and then the desired second function
button pressed within three seconds. The symbol
3
indicates that the button is to be pressed within three
seconds.
Enter SETUP (page 14) ---------------------------------------------------
Assign antenna inputs (page 16) -----------------------------------
Select Transceiver ‘A’
or Receiver ‘B’ (page 7) -----------------------------------------------
Select VFO (page 7) -----------------------------------------------------
Adjust Frequency (pages 6, 7, 13) ----------------------------------
Set tuning wheel step size (pages 13, 15) ------------------------
Select Mode (page 7) --------------------------------------------------
Select Priority (page 7) -------------------------------------------------
Set Priority Channel Action (page 14) ----------------------------
Set transmit power (page 18) ----------------------------------------
Select relative transmit power (page 7) --------------------------
Set time-out-timer for transmit (page 16) ------------------------
Select IF Bandwidth for Receiver ‘B’ (page 7) -----------------
Lock (Unlock) Controls (page 7) ------------------------------------
Set LCD backlight intensity (page 19) -----------------------------
Set Audible Beep On or Off (page 16) ---------------------------
Set Transmit Microphone audio filter On or Off (page 19) -
Press and hold
SETUP
D
.
Press and hold
SETUP
D
. Rotate tuning wheel to #15. Press
/
to set 0, 1, 2, or 3.
Press
A / B
A
.
Press
2
VFO
.
Turn tuning wheel, Press
/
buttons, or Press
NUM
*
3
numeric buttons.
‘A’: Press and hold
SETUP
D
. Rotate tuning wheel to #04.
Press
/
to set 5, 10, 15, 20 or 25 kHz.
‘B’: Press and hold
SETUP
D
. Rotate tuning wheel to #05.
Press
/
to set 5, 10, 12.5, 15, 20, or 25 kHz.
‘A’: Press
MODE
B
to select VOICE, DATA, or Standby.
‘B’: Press
MODE
B
to select VOICE, DATA, WXSAT, or Standby.
Press
1
PRIO
for selected receiver frequency to be priority.
Press and hold
1
PRIO
to initiate priority watch (PW lights).
Press and hold
SETUP
D
. Rotate tuning wheel to #02. Press
/
to set 0 or 1.
Press and hold
SETUP
D
. Rotate tuning wheel to #50 (Low),
#51 (Medium), or #52 (High). Press
/
to set level.
Press
P. OUT
C
.
Press and hold
SETUP
D
. Rotate tuning wheel to #14. Press
/
to set 0 (no time out), 1, 2, 3, or 10 minutes.
‘B’ only: Press
9
B BW
.
Press
0
LOCK
for selected transceiver ‘A’ / receiver ‘B’.
Press and hold
SETUP
D
. Rotate tuning wheel to #56.
Press
/
to set intensity.
Press and hold
SETUP
D
. Rotate tuning wheel to #12. Press
/
to set 1 (beep on) or 0 (beep off).
Press and hold
SETUP
D
. Rotate tuning wheel to #58. Press
/
to set 1 (filter on) or 0 (filter off).