For Receiver ‘B’:
Select LIST scanning:
1) Select SETUP #27 - set to ‘2’.
SETUP
Select a List and Setup channels in the List:
2) Select SETUP #40 (List #0) through #49 (List #9).
SETUP
NUM
3) Construct the list by pressing the
/
buttons to
select the List index number (0 - 9) and entering the
desired 2-digit memory channel number at that se-
lected List index number. [Press
NUM
*
to clear a lIst index
number (— will appear at a cleared List index number)].
- Setup additional lists by repeating steps 2 and 3.
Select a Scan STOP method:
4) Select SETUP #19 - set to: ‘0’ for a Seek scan
SETUP
5) Exit the SETUP mode.
To start a List scan:
6) Press the
A / B
A
button to select Receiver ‘B’.
7) Press and hold the
3
MEM
button, followed by the
numeric entry of the desired List index number (0 - 9), to
start the scan.
8) Press the
3
MEM
,
2
VFO
, or
1
PRIO
to exit the scan mode.
Scan Functions, continued 25
SCAN VFO
A VFO scan permits continuous tuning of frequencies
between two programmed limits.
For Receiver ‘A’:
1) Select SETUP #20 - enter the START frequency endpoint
from 144 - 148 MHz.
SETUP
NUM
*
2) Select SETUP #21 - enter the STOP frequency endpoint
from 144 - 148 MHz.
SETUP
NUM
*
3) Select SETUP #04 - set to 5, 10, 15, 20, or 25 kHz step
size.
SETUP
4) Select SETUP #16 - set to: ‘0’ for a Seek scan
SETUP
5) Exit the SETUP mode.
6) Press the
A / B
A
button to select Receiver ‘A’.
7) Press and hold the
2
VFO
button to start the scan.
Press the
/
buttons during scan to reverse the
scan direction, if desired.
8) Press the
3
MEM
,
2
VFO
, or
1
PRIO
to exit the scan mode.
‘1’ for a Carrier scan
‘2’ for a Time scan
‘3’ for a Resume scan
*142-150 MHz operation with proof of MARS and CAP license.
‘1’ for a Carrier scan
‘2’ for a Time scan
‘3’ for a Resume scan