DRAKE TR270, Owner'S Manual, Page: 29 / 59

24 Scan Functions, continued
-SCAN ALL UNLOCKED MEMORY CHANNELS WITHIN A
PROGRAMMED RANGE OF MEMORY CHANNELS.
For Receiver ‘A’:
1) Select SETUP #24 - set to ‘1’.
SETUP
2) Select SETUP #25 - set to the desired memory channel
number to define the START endpoint for a Range Scan.
SETUP
3) Select SETUP #26 - set to the desired memory channel
number to define the STOP endpoint for a Range Scan.
SETUP
4) Select SETUP #18 - set to: ‘0’ for a Seek scan
SETUP
5) Exit the SETUP mode.
6) Press the
A / B
A
button to select Receiver ‘A’.
7) Press and hold the
3
MEM
button to start the scan.
Press the / buttons during scan to reverse the
scan direction, if desired.
8) Press the
3
MEM
,
2
VFO
, or
1
PRIO
button to exit the scan
mode.
For Receiver ‘B’:
1) Select SETUP #27 - set to ‘1’.
SETUP
2) Select SETUP #28 - set to the desired memory channel
number to define the START endpoint fo a Range Scan.
SETUP
3) Select SETUP #29 - set to the desired memory channel
number to define the STOP endpoint for a Range Scan.
SETUP
4) Select SETUP #19 - set to: ‘0’ for a Seek scan
SETUP
5) Exit the SETUP mode.
6) Press the
A / B
A
button to select Receiver ‘B’.
7) Press and hold the
3
MEM
button to start the scan.
Press the / buttons during scan to reverse the
scan direction, if desired.
8) Press the
3
MEM
,
2
VFO
, or
1
PRIO
button to exit the scan
mode.
-SCAN A LIST OF MEMORY CHANNELS
(ONE LIST OF 10 CHANNELS)
For Receiver ‘A’:
Select LIST scanning:
1) Select SETUP #24 - set to ‘2’.
SETUP
Select a List and Setup channels in the List:
2) Select SETUP #30 (List #0) through #39 (List #9).
SETUP
NUM
3) Construct the list by pressing the / buttons to
select the List index number (0 - 9) and entering the
desired 2-digit memory channel number at that se-
lected List index number. [Press
NUM
*
to clear a List index
number (— will appear at a cleared List index number)].
- Setup additional lists by repeating steps 2 and 3.
Select a Scan STOP method:
4) Select SETUP #18 - set to: ‘0’ for a Seek scan
SETUP
5) Exit the SETUP mode.
To start a List scan:
6) Press the
A / B
A
button to select Receiver ‘A’.
7) Press and hold the
3
MEM
button, followed by the
numeric entry of the desired List index number (0 -9), to
start the scan.
8) Press the
3
MEM
,
2
VFO
, or
1
PRIO
to exit the scan mode.
‘1’ for a Carrier scan
‘2’ for a Time scan
‘3’ for a Resume scan
‘1’ for a Carrier scan
‘2’ for a Time scan
‘3’ for a Resume scan
‘1’ for a Carrier scan
‘2’ for a Time scan
‘3’ for a Resume scan