Receiver B Input
ANTENNA 1
ANTENNA 2
ANTENNA 2
ANTENNA 2
0 = no audible beep when
button is pressed
1 = audible beep when
button is pressed
0 = normal mode
1 = repeater mode
Set:
0, 1, 2, 3, or 10 minutes
0= no time out
0 = Auto selection
1 = Auto selection
2 = RECEIVER B Input
is ANTENNA 1
3 = RECEIVER B Input
is ANTENNA 2
For Setups #16,17,18, 19:
SEEK (0) - Stop scan at first
detected carrier and exit
the scan mode.
CARRIER (1) - Stop scan at
a detected carrier, then
resume scan 5 seconds
after carrier drops.
TIME (2) - Stop scan at a
detected carrier, wait 5
seconds, and then resume
scan.
RESUME (3) - Stop scan at
a detected carrier and
resume scan immediately
after carrier drops.
Enter frequency (for
example: 144.0000)
SETUP
16 Setup Menu, continued
SETUP MODE
NUMBER FUNCTION
DISPLAY
(factory defaults shown)
0 or 1
SETUP
0 or 1
OPTION / PARAMETER
DESCRIPTION
0, 1, 2
or 3
Set audible beep on
or off for any button
depression
Set for Normal or
Crossband Repeater
mode
Time - Out - Timer on
Transmit
Assign Antenna
Input(s) to Receiver 'B'
(Receiver A Input is
always from
ANTENNA 1)
Methods for VFO
SCAN Stop -
Receiver A
Methods for VFO
SCAN Stop -
Receiver B
Methods for
Memory SCAN Stop -
Receiver A
Methods for
Memory SCAN Stop -
Receiver B
Receiver A - Program
START
frequency
endpoint for
VFO Scan
Frequency
136-174MHz
420-470 MHz
Receiver B Input
ANTENNA 1
ANTENNA 2
1 2
1 3
1 4
1 5
16
17
18
19
20
SETUP
SETUP
0, 1, 2
or 3
0, 1, 2
or 3
0, 1, 2
or 3
0, 1, 2
or 3
Frequency
142-150MHz
136-142MHz
150-174MHz
420-470 MHz
SETUP
SETUP
NUM
SETUP
SETUP
SETUP