For Receiver ‘B’:
1) Select SETUP #22 - enter the START frequency endpoint
from 136 - 174 MHz or 420 - 470 MHz.
SETUP
NUM
2) Select SETUP #23 - enter the STOP frequency endpoint
from 136 - 174 MHz or 420 - 470 MHz.
SETUP
NUM
3) Select SETUP #05 - set to 5, 10, 12.5, 15, 20, or 25 kHz
step size.
SETUP
4) Select SETUP #17 - set to: ‘0’ for a Seek scan
SETUP
5) Exit the SETUP mode.
6) Press the
A / B
A
button to select Receiver ‘B’.
7) Press and hold the
2
VFO
button to start the scan.
Press the
/
buttons during scan to reverse the
scan direction, if desired.
8) Press the
3
MEM
,
2
VFO
, or
1
PRIO
to exit the scan mode.
LOCKING A MEMORY CHANNEL
Memory channels tagged with the
symbol will be
skipped during the scan process.
A)
Press
3
MEM
and select the desired memory location
with the
/
buttons, or by direct entry of a two-
digit memory channel number. If recalling an unpro-
grammed memory channel with direct entry, an error
beep is heard.
B)
To lock out a memory channel: Press
0
LOCK
. The
symbol lights adjacent to the memory channel number.
To unlock a tagged memory channel, Press
0
LOCK
. The
symbol will disappear.
26 Scan Functions, continued
‘1’ for a Carrier scan
‘2’ for a Time scan
‘3’ for a Resume scan