A P P E N D I X A
Using Dragon NaturallyMobile
Dragon NaturallySpeaking User’s Guide
127
Using the Dragon
NaturallyMobile recorder as a
microphone
If you have a Dragon NaturallyMobile recorder, you can use it as a
microphone when it’s connected to a computer with the supplied
transfer cable.
To use the recorder as a microphone:
1
Open the user you created for the Dragon NaturallyMobile recorder (if
it’s not already open). (On the User menu, click Open.)
2
Make sure the recorder is connected to the serial port of your computer
and the Voice It Link software is not running.
3
Click the Mic On/Off tool so the microphone is on.
4
Wait until the recorder display reads “Mic On.” This takes about two or
three seconds after you click on the Mic On/Off tool.
5
Begin speaking, holding the microphone element of the recorder almost
touching the corner of your mouth and a bit to the side. Don’t hold the
recorder so that the microphone element is directly in front of your
mouth.
6
When you’re finished, click the Mic On/Off tool so the microphone is
off.
Turning off the microphone in this way does not turn off the recorder. To
conserve your batteries, turn off the recorder by pressing the Power button.
Hold the recorder so that the
microphone element is at the
side of your mouth, not in
front of it.
NOTE
