Maintenance
42
Instructions for use Polaris Multimedia
Locking segment of the spring arm
The dimensions (minimum material thickness and
minimum length) of the locking segment must be
inspected every 2 years. If the dimensions are
lower than specified, the locking segment must be
replaced. The locking segment must be greased
before insertion.
1
Remove the device from the spring arm.
2
Check the dimensions of the locking segment
(minimum material thickness and minimum
length) and replace if necessary.
3
Grease the locking segment and the gimbal
mounting journal.
4
Fit the device to the spring arm.
01
1
Mi
n
imu
m l
en
g
th
9.5m
m
(
0.3
7i
n
)
M
inimu
m le
ngt
h
9.
5
m
m (
0.3
7
in
)
Material thickness
min. 1.5 mm (0.06 in)
Material thickness
min. 1.5 mm (0.06 in)
Material thickness
min. 1.5 mm (0.06 in)
Mi
n
imu
m l
en
g
th
11
.8
mm
(0.4
6
in)
