Appendix 2
476
Issue date: 17 November 2006
62 of 80
LFB image 250389
LFB image 250388
LFB image 250387
LFB image 1136809
LFB image 250419
LFB image 1136798
Appendix 2
– Returning the BA set to OSG
1
Insert the face mask into the bag with the LDV placed nearest the Velcro closure of the bag.
Note: the face mask bag clip must be in the position shown to ensure the face mask lays correctly
when secured to the BA set cylinder strap later in the procedure (see image 250389).
2
The head harness and LDV supply hose should lay inside the face mask. The LDV hose should be
detached from the BA set at the in-line connection (see image 250388).
3
Secure the face mask bag using the Velcro seal (see image 250387).
4
Place a red protective cap over the reducer cylinder connection (see image 1136809.
5
Position the BA log book against the backplate with the window of the log book cover facing
outwards so that the set number can be seen through the window. Use snap hook to attach the
log book (see image 250419).
6
Position the face mask bag as shown, the face mask bag upper clip to the right shoulder side of
the set and the face side of the mask against the backplate (see image 1136798).
