476
Issue date: 17 November 2006
29 of 80
LFB image 684786
LFB image 1136790
LFB image id 1136794
LFB image 684790
LFB image 684773
14.57
Ensure cylinder retaining strap is fully extended so there will
be clear space around the cylinder cover for ease of
movement.
14.58
Insert cylinder from opposite end to reducer/cylinder
connection (this is to ensure that no fibres are deposited in
the connection if the cover were to pass over it).
14.59
Line-up the two connections (see image 684786 right).
Note: the reducer/cylinder connection pivots forwards and
backwards and therefore may not line-up vertically with the
cylinder connection.
14.60
To assist with connection – lift the cylinder slightly at the
opposite end to the connection, thereby lining-up both
threads vertically (see image 1136794 right).
14.61
Screw the connections together clockwise (see image
1136790 right).
Note: finger and thumb pressure only.
14.62
Adjust the (extended) strap circumference to fit the cylinder
by pulling the strap through the securing mechanism (see
image 684790 right).
