Using Mattress Heater (Babytherm 8010)
Allow approximately 1 hour for thorough warm-up.
Setting a mattress temperature
Temperature can be varied in increments of 0.1 ºC.
Setting temperature in the
normal range
(36
°
C to 38
°
C):
1
Display of current set value for mattress temperature
2
Press
P
or
p
key, until desired temperature is
showing on the display.
3
Display shows message:
Set mattress temperature
Press OK-button to confirm
.
If setting is not confirmed within 10 seconds, the
message will disappear and the previous setting will
remain in effect.
4
Press
»OK«
key = confirm new set value.
1
Display of new set value of mattress temperature.
Extending upper limit of setting range:
5
Press
P
key, until
6
set value
38.0 ºC
is displayed.
7
Display shows message:
Set mattress temperature
Confirm temp. above 38 ºC with OK
.
8
Press
»OK«
key = release extended range.
9
Yellow display
>38 ºC
is now blinking.
5
Press
P
or
p
key, until desired temperature is
showing on the display.
7
Display shows message:
Set mattress temperature
Press OK-button to confirm
.
8
Press
»OK«
key = confirm new set value.
6
Display of new set value of mattress temperature.
9
Yellow display
>38 ºC
stays continuously lit.
WARNING !
Always warm up mattress before placing
patient.
Do not switch off Babytherm while a baby is
lying on the gel mattress as this will result in
uncontrolled cooling of patient.
Operation
Using Mattress Heater (Babytherm 8010)
37
Operating Instructions Babytherm 8004/8010, 2. ed.
15 min
Babytherm 8010
1
5
10
<36
°
C
°
C
skin
man.
skin
°
C
manual
mattress.
°
C
2
1
3
4
15 min
Babytherm 8010
1
5
10
<36
°
C
°
C
skin
man.
skin
°
C
manual
mattress.
°
C
5
6
9
7
8
