Ceiling and wall attachment
Dr. Mach
Lamps and Engineering
Central spring arm (until 2000)
•
Loosen safety screw
7
using a crosshead screw
driver and remove.
•
Push safeguard bushing
8
backwards.
•
Remove segment
9
.
•
Slip helmet
10
over the journal of the lamp bow.
•
Loosen the two lateral brake screws
11
on the
spring arm using the allen key SW3 (included in
the scope of supply).
•
Push the lamp bow into the bore of the spring
arm, such as the journal groove
13
is visible in
slot
12
.
•
Insert segment
9
and push safeguard bushing
8
forwards, such as the borehole in the safeguard
bushing matches with the thread in the spring
arm.
•
Insert safety screw
7
and tighten.
7 8
9
12
10
13
11
59500001
Edition 06
11.03.2003 / Bak Page 34/48
