Ceiling and wall attachment
Dr. Mach
Lamps and Engineering
Type with ceiling anchorage ring and
intermediate flange
•
Screw three nuts
G
(each 120°) to the plate of
the ceiling anchorage ring, the other three 1cm
away from the plate, unscrew nuts
F
.
•
Position the intermediate flange on the
threaded bolts and adjust it to the required
height using three nuts
F
and washers
H
.
•
Then position all six nuts
G
gently against the
intermediate flange from above.
•
Screw on the remaining three nuts
F
with
washers
H
and tighten all six nuts equally
cross-wise with a torque wrench (25 Nm).
•
Verify balance with a spirit-level.
For mounting the flange to the intermediate
flange proceed as described at the design with
ceiling anchorage ring.
59500001
Edition 06
11.03.2003 / Bak Page 14/48
