5
Hardware Installation
4
Tools Needed
4.1
To install the NetGuardian, you'll need the following tools:
Phillips No. 2 Screwdriver
Small Standard No. 2 Screwdriver
Computer with T/NG216-Dialup loaded
Mounting
4.2
Fig. 4.1.
The NetGuardian 216 can be flush or rear-mounted
The NetGuardian 216 can be mounted in a 19" rack or a 23" rack by using the provided rack ear for each size.
Two rack ear locations are provided, the unit can be mounted either on the right or left. Attach the appropriate
rack ear in the flush-mount or rear-mount locations shown in Figure 4.1.
Note:
Rack ears can be rotated 90° for wall mounting or 180º for other mounting options not shown.
