23
6. Click in the Dial Backup box to select Backup mode. Leave the box unchecked for Normal mode.
7. In the Primary Dial # field, enter the phone number the NetGuardian will use to dial T/Mon.
8. You may also enter a secondary phone number to set the NetGuardian to Dual mode.
Editor Relays Tab
5.7
Fig. 5.15.
Use Relays tab to set relays to dial
To enter a description for your relays use the following steps:
1. In the Editor Mode, click on the Relays tab.
2. Type the descriptions of your relays in the Description box — see Figure 5.15.
3. In the Dial column, select Yes or No to specify which relays may cause the NetGuardian 216 to dial T/Mon.
Editor Alarms Tab
5.8
All 16 discrete alarms are configured from the Editor Mode > Alarms tab. See Figure 5.16 for example
descriptions of the alarm point and polarity (normal or reversed).
Fig. 5.16.
Configure alarm descriptions in the Alarms tab
To configure your alarms, use the following steps:
1. From the Editor Mode select the Alarms tab.
