28
Write to Memory
5.11
Fig. 5.22.
The Write button
Once you press the Write button, you will be prompted to save your configurations before you write to the
NetGuardian 216. You may choose to save your configurations or select No to skip and continue — see Figure
5.22.
Fig. 5.23.
Click Yes to save your configuration to your PC, or click No to write without saving your configurations
Any changes to NetGuardian configuration will
NOT
take effect until you click the Write button in the toolbar
and reboot the unit. The Write button will save all changes you have made in the Editor Mode to the NetGuardian
216 and will erase any previous settings. The Write button will automatically reboot the unit at the end of the
configuration cycle.
Reboot Using T/NG216-Dialup
5.12
Fig. 5.24.
Reboot button
Fig. 5.25.
Reboot confirmation box
To reboot the NetGuardian 216, click on the red reboot button — see Figure 5.24. The reboot confirmation box
will appear. Click Yes or No to confirm the reboot.
Note:
Use the reboot button only when you need to reboot the NetGuardian 216.
