17
5.2.1 Connecting via Craft Port
Fig. 5.3.
Select a different port or TCP/IP connection
To access the NetGuardian via the craft serial port, follow these steps:
1. Click the Exit button.
2. Select the Settings Menu.
3. Select COM Port — see Figure 5.3.
4. In Communication Mode select Craft Port — see Figure 5.4.
5. Enter your COM Port Number.
Fig. 5.4.
Change your COM Port
6. Press Set.
7. Proceed with configuration.
5.2.2 Connecting via TCP/IP
If you are accessing the NetGuardian via TCP/IP follow these steps:
1. Click the Exit button.
Fig. 5.5.
Select a different port or TCP/IP connection
2. Select the Settings Menu — see Figure 5.5.
3. Select COM Port.
