29
Turn-up and Test Mode
6
Fig. 6.1.
The Turn-up and Test Mode screen
Turn-up and Test Mode provides complete information about the configuration and operation of the NetGuardian
216. There are several ways to go to the Turn-up and Test Mode, including:
1. Click on the Turn-up and Test Mode icon on the initial prompt.
2. Click on the Turn-up and Test Mode icon on your toolbar menu.
3. Go to the Action menu and select Turn-up and Test Mode.
The Turn-up and Test Mode window has four tabs: Alarm, Analog, Relays, and Date/Time. When you open the
Turn-up and Test Mode window, T/NG216-Dialup automatically selects the Alarm tab and displays the Alarm
Grid and the Log screen — see the following section (Alarm Tab) for more information.
Check the PC Change-of-State Beep box to enable audio notification of alarms on your PC.
You can exit Turn-up and Test Mode by clicking the Exit button.
Note
: See Reference Information (Section 9) for complete display mapping and meaning. Alarm points may be
noticed on displays 2 and 3. These may not reflect actual points, but bits associated with analog readings.
