6
Mounting
6.2
Fig. 6.1 - The NetDog can be wall- or rack-mounted
Wall-Mounting Instructions
Depending on how your NetDog was ordered, you will attach wall-mount flanges to both sides of the NetDog in
one of two ways:
1. Place the flange over the protruding screws and affix it with two of the provided 3/8" hex nuts
2. Affix the flange to the NetDog with two of the provided 6/32 screws (NOTE: screws longer than those
provided may contact the internal components of the NetDog, adversely affecting normal operation).
3. After flanges have been attached to the NetDog, mount it in the appropriate location with 2 screws through
each flange.
Rack-Mounting Instructions
The NetDog 82 BW mounts in a 19" rack or a 23" rack using the provided rack ears for each size. Two rack ear
locations are provided. Attach the appropriate rack ears in the flush-mount or rear-mount locations shown in Fig.
6.1.
Note: Rack ears can be rotated 90° for wall mounting or 180º for other mounting options (not shown).
Summary of Contents for NetDog 82 BW
Page 47: ...43...