Dover Markem-Imaje 1050 User Manual Download Page 50 | Manualshive

Page: 50 / 64

background image

46

10.3 Upgrades

10.3.1 Firmware

Upgrade

Upgrading the firmware requires a valid firmware image from Markem-Imaje. The

printer must be turned on and connected to the controller computer before beginning the
process. After pressing the button, a valid firmware image must be selected to upload to
the printer. After selecting the firmware image, the upgrade will begin automatically. A
message indicating successful upgrade will be displayed when the process is complete.

10.3.2 Replace

Head

There are two ways to incorporate the license and IP address information from the

selected file.

The

(Replace Head) button incorporates the license and IP address

information from the selected file, overwriting the existing information in the selected
head. This can be useful if an upgraded or replacement head is installed and you would
like to save other settings such as Distance From Sensor, Pen Fire Voltage, or Pen Fire
Time from the old print head.

The

(Load New Printer) button incorporates the license and IP address

information from the selected file, overwriting the existing information in the selected
head. The Printer Configuration settings are reset to default values.

For

information

«
...
48
49
50
51
52
...
»

Summary of Contents for Markem-Imaje 1050

































































Reviews:

No comments

Related manuals for Markem-Imaje 1050

Brand: SPRT Pages: 28

Brand: Xante Pages: 6

Brand: Xerox Pages: 13

Brand: Evolis Pages: 45

Accel-a-Writer 8200

Brand: Xante Pages: 12

Brand: Gestetner Pages: 144

4510B - Phaser B/W Laser Printer

Brand: Xerox Pages: 10

Brand: iDPRT Pages: 41

Brand: Kyocera Pages: 44

1235N - Phaser Color Laser Printer

Brand: Tektronix Pages: 240

Brand: Printronix Pages: 148

imageRUNNER ADVANCE DX C5870i

Brand: Canon Pages: 100

imageRUNNER ADVANCE C356iF

Brand: Canon Pages: 96

imageRUNNER ADVANCE C350 series

Brand: Canon Pages: 1173

imageRUNNER ADVANCE DX 6870i

Brand: Canon Pages: 100

imageRUNNER ADVANCE 715iFZ III

Brand: Canon Pages: 92

ImageRUNNER C1538iF

Brand: Canon Pages: 120

imageRUNNER ADVANCE DX 717iFZ

Brand: Canon Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands