dotykacka DOTPO01501, Quick Manual

Page: 54 / 121

V
54
en
Cash register connection
1. Connect the cash register to the socket using the power adapter, and leave it
to be charged continuously. The charging status can be constantly checked
by short pressing the switch-on button. You can use also the USB port to
charge the cash register.
2. Once the cash register is fully charged, plug the printer cable into the cash
register USB port and then switch on both the cash register and printer.
3. If you have a mobile Bluetooth printer, insert a battery into the bottom part
and plug it. Connect the power adapter to the Bluetooth printer and then
plug it into the socket. Let the printer charge. Once the printer is fully char-
ged, the light goes out. Now you can start using it.
Every time when you discharge the cash register completely, leave it to be swit-
ched off and charged continuously for at least 4 hours, so the condition of the
built-in battery will be optimized.
To use a Bluetooth printer, it first has to be paired with the cash register.
The pairing procedure is described in the online user guide in the chapter
Cash register preparation » Connecting peripherals » Connecting Bluetooth
printer
.