Dot Hill Systems RAIDCore, User Manual

Page: 73 / 134

RAIDCore User Manual 71
The Array List Section of the Array Status Window
Elements of the Array List Section
The Array List section of the Array Status window provides the information about the arrays, as indicated in the
following table.
Table 29 Array List Section of the Array Status Window
Element Description
Device The array number.
O.S. Name Drive number assigned by the operating system to the array.
• “Drive
n
” appears for an array that is Online and not hidden from the operating
system.
• “Hidden” appears if the array is hidden from the operating system.
• “None” appears if the array is Offline.
Partition Drive letter that was assigned to this array during the partition process. (A blank
space appears if the array has not been partitioned).
NOTE:
If a dynamic volume is created on an array, RAIDConsole cannot
retrieve the volume’s drive letter.
Array Name User-created name for the array.
Type RAID level (RAID type) or Legacy.
Total Capacity Total capacity: 1MB = 1,000,000 bytes, 1GB = 1,000,000,000 bytes.
State State of the array (Normal, Critical, Offline).
Task Task type, if in progress (Transform, Copy, Check, Check_Bitmap, Not_Active,
Create, Restore).
Task State The state of the task (Started, Paused, Completed); the progress of the task is
given in the Array View section.
Pri Task priority if a task is in progress.
Scan Background Array Scan enabled? (Yes/No).
Cache Current cache setting (NC = No Cache, R = Read Cache, WB = Write Back
Cache, RW = Read/Write Cache)
Dst Spare Indicates whether the distributed spare option is being used.
Ded Spare Indicates the number of dedicated spares assigned to the array.