Doro 850 colour, Manual

Page: 5 / 44

English
4 www.doro.com
English
www.doro.com 5
Installation
Unpacking
The package contains:
- Handset - Mains adapter (9VAC 300mA)
- Base unit - Line cord
- 3 AAA batteries (Ni-MH 1.2V 600 mAh) - Belt clip
Models with an extra handset (e.g. +1) also include an additional handset, batteries,
charger and mains adapter.
IMPORTANT!
Only use with the supplied power adaptor/s.
Connection
1. Connect the mains adapter to the AC 9V socket on the base unit and to an
electrical wall socket.
2. Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
3.
Place the handset in the base unit, with the keypad facing outwards. Once the
handset is correctly positioned in the base unit, a beep will be heard.
4. Leave the handset to charge initially for 24 hours before use.
5.
Connect the line cord to the telephone plug and the
T
socket on the base unit.
6. Plug into the telephone network wall socket.
7.
Select language according to the description on page 25.
Only for models with an extra handset (+1):
8.
Connect the mains adapter to electrical wall socket, and to the socket on the
charger.
9. Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
10.
Place the handset in the base unit, with the keypad facing outwards. Once the
handset is correctly positioned in the base unit, a beep will be heard.
11. Leave the handset to charge initially for 24 hours before use.
Important note!
Use an original adapter only (9VAC)!
Under power failure conditions the telephone will not operate. Please ensure that a separate telephone not
dependant on local power is available for emergency use. The earpiece of the handset may attract small
ferromagnetic objects such as staples and pins, care should be taken when placing the handset near these
items. Do not place the base unit close to other electrical equipment such as TV sets, computer screens,
telecom equipment, fans etc. This will minimise the risk of interference. Do not place the base unit in
areas where it will be exposed to direct sunlight or other major heat sources.