Doro 850 colour Manual Download Page 38

Page: 38 / 44

English

www.doro.com

English

www.doro.com

Other

Australia and New Zealand

Products permitted for connection to the telephone network are marked with

in Australia and

in New Zealand. These marks indicate the

products comply with the regulations and can be used without concern in the

country of purchase.

If you believe this product is malfunctioning, please refer to the relevant section

and/or consult the troubleshooting guide in this manual to ensure that you have

followed the instructions carefully. As an alternative you can visit our web site

for FAQ’s or send an e-mail for a prompt reply.

Electro Magnetic Radiation (EMR)

This telephone complies with applicable safety requirements for exposure to

radio waves.

The mean power of this telephone is not greater than the 20mW limit at which

testing is required.

Guarantee

This product is guaranteed for a period of 12 months from the date of purchase.

Should you experience difficulties with the product, please contact us for

assistance. If the product is then found to be faulty you will be asked to return

it directly to us with a copy of the purchase receipt. This guarantee shall not

apply to a fault caused by an accident or a similar incident or damage, liquid

ingress negligence, abnormal usage, not reasonably maintained or any other

circumstances on the purchaser’s part. Furthermore, this guarantee shall not

apply to a fault caused by a thunderstorm or lightning, excessive or any other

voltage fluctuations or faults on the telephone line. (As a matter of precaution,

we recommend disconnecting the telephone during a thunderstorm).

This guarantee does not affect your statutory rights.
AUSTRALIA

NEW ZEALAND

DORO Australia Pty Ltd

Atlas Gentech (NZ) Limited

PO Box 6760

Private Bag 14927

Baulkham Hills BC NSW 2153

Panmure

Australia

Auckland

New Zealand

Consumer Support

Ph: Ph: 1300 885 023

Ph: 0900-500-25 (Toll Call)

Fax: (02) 8853-8489

Fax: (09) 574-2722

Email: [email protected]

Web site: www.doro.com.au

Summary of Contents for 850 colour













































Search results

Summary of Contents for 850 colour

Reviews:

Related manuals for 850 colour

Brands by name

Popular brands

Doro 850 colour, Manual

Search results

Summary of Contents for 850 colour

Reviews:

Related manuals for 850 colour

Brands by name

Popular brands