Doro 850 colour Manual Download Page 37

Page: 37 / 44

English

www.doro.com

English

www.doro.com

Other

Specific Absorption Rate (SAR)

This equipment meets current international safety requirements for exposure to

radio waves.

This telephone measures 0.004 W/kg (measured over 10g tissue).

The limit value set by the WHO is 2W/kg (measured over 10g tissue).

If you cannot resolve the fault using the faultfinder section, technical support is

available on the

Premium Rate Number: 0906 302 0114.

Calls cost

50 pence per minute

(prices correct at the time of going to press),

and is operational between 9AM - 5PM Monday-Friday excluding Bank

Holidays. Alternatively,

E-mail on: [email protected]

You can contact us in writing: Consumer Support Group, Doro UK Ltd.,

22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE,

(regarding any Spares or Technical query), or

Telephoning (Spares only): 01527 584377

Web site: www.doro-uk.com

Guarantee

This product is guaranteed for a period of 12 months from the date of purchase.

Proof of purchase is required for any service or support required during the

guarantee period.

This guarantee shall not apply to a fault caused by an accident or a similar

incident or damage, liquid ingress, negligence, abnormal usage, not reasonably

maintained or any other circumstances on the purchaser’s part. Furthermore,

this guarantee shall not apply to a fault caused by a thunderstorm or any other

voltage fluctuations.

This guarantee does not in any way affect your statutory rights. (As a matter of

precaution, we recommend disconnecting the telephone during a thunderstorm.)

Summary of Contents for 850 colour













































Search results

Summary of Contents for 850 colour

Reviews:

Related manuals for 850 colour

Brands by name

Popular brands

Doro 850 colour, Manual

Search results

Summary of Contents for 850 colour

Reviews:

Related manuals for 850 colour

Brands by name

Popular brands