background image

English

34 

www.doro.com

 

 English

www.doro.com 

35

Expanded System

General information

DECT (Digital Enhanced Cordless Telephone) is a digital method of 

transmission for cordless telephones. You can:

-   Use up to 6 handsets with the same base unit.

-   Make internal calls (intercom) and transfer calls between handsets 

   connected to the same base unit

-   Connect (register) up to 4 base units to the same handset.

Additional handsets can be purchased from your local retailer.

This model is also GAP (Generic Access Profile) compatible, which means 

that the handset and the base unit can both be used with most other GAP-

compatible units irrespective of manufacturer. However, the GAP protocol does 

not guarantee all functions will work.

Multiple handsets

The multiple handset function has numerous practical applications, e.g. 

employees in an office can have several handsets linked to the same base unit. 

They can all answer incoming calls, make outgoing calls, use the handsets 

internally as an intercom system, and also transfer external calls between the 

handsets. One external call and one internal call can be active simultaneously. 

To be able to use extra handsets with a base unit, you must register the handset. 

Registration enables the handset to know which base unit it belongs to.

On registration, the handset is allocated a specific handset number, e.g. 2. This 

number is also used for internal calls between handsets. When you purchased 

the telephone, the handset was pre-registered with the accompanying base unit. 

The handset has the handset number 1, which is shown in the display in standby 

mode. Refer to the Registration chapter for more information.

If you wish to use several handsets with one base unit, you should ensure that 

the base unit is centrally positioned to evenly distribute the base unit range 

among the handsets. 

Summary of Contents for 850 colour













































Reviews: