Dorner iDrive 3200 Series, Installation, Maintenance & Parts Manual

Page: 13 / 48

851-702 Rev. A 13 Dorner Mfg. Corp.
3200 Series iDrive Belt Conveyors
Preventive Maintenance and Adjustment
Belt Removal for Conveyor Without Stands
1. If equipped, remove return rollers and guiding and
accessories from one side of conveyor.
2. On tension end of the conveyor, identified by the pinion
locking screw (Figure 24, item 1) , push in head plate
assembly (Figure 24, item 2) : Loosen the pinion
locking screw (Figure 24, item 1) , adjust the pinion
torque screw (Figure 25, item 1) . On both sides of
conveyor, loosen the two tail clamp bolts (Figure
24, item 3) , and push head plate assembly (Figure
24, item 2) inward.
Figure 24
Figure 24
Figure 25
Figure 25
3. Remove conveyor belt.
Belt Removal for Conveyor With Stands
1. Place temporary support stands (Figure 26, item 1) at
both ends of the conveyor.
Figure 26
Figure 26
2. Remove mounting brackets (Figure 26, item 2) from
one side of conveyor. (Reverse steps 3 & 4 of
“Mounting Brackets” section on page 7).
3. If equipped, remove return rollers, guiding and
accessories from the same side of conveyor.
4. On tension end of the conveyor, identified by the pinion
locking screw (Figure 27, item 1) , push in head plate
assembly (Figure 27, item 2) : Loosen the pinion
locking screw (Figure 27, item 1) , adjust the pinion
torque screw (Figure 28, item 1) . On both sides of
conveyor, loosen the two tail clamp bolts (Figure
27, item 3) , and push head plate assembly (Figure
27, item 1) inward.
Figure 27
Figure 27
Figure 28
Figure 28
5. Remove belt (Figure 29, item 1) from conveyor.
Figure 29
Figure 29
1
3
2
1
2
1
2
1
3
2
1
1
1