Dorner iDrive 3200 Series, Installation, Maintenance & Parts Manual

Page: 19 / 48

851-702 Rev. A 19 Dorner Mfg. Corp.
3200 Series iDrive Belt Conveyors
Preventive Maintenance and Adjustment
3. Disconnect two wiring harness connectors (Figure
54, item 1) .
Figure 54
Figure 54
4. Loosen four hex head screws (Figure 54, item 2) on
each side of conveyor.
5. Remove two hex head screws (Figure 56, item 1) .
Figure 55
Figure 55
6. Slide drive motor and plate (Figure 56, item 1) to
loosen tension on timing belt (Figure 56, item 2) .
Figure 56
Figure 56
7. Remove hex head screw (Figure 57, item 1) and washer
from both sides of the conveyor.
Figure 57
Figure 57
8. Remove drive spindle assembly (Figure 58, item 1) and
replace.
Figure 58
Figure 58
2
1
2
1
2
1
1
1