52
ED100LE
02-2021
DL4616-001
dormakaba ED100LE operator – Fine cover
Installation Instructions
Chapter 18
1
Slide shoe
2
CPD lever
mounting hole
Fig. 18.3.8 Pivot pin/slide shoe attachment to CPD lever
3
Pivot pin M8 SHCS
Fig. 18.3.9 Track mounted to slide shoe/pivot pin assembly
1
1
Fig. 18.3.10 Track assembly mounted to door
1
Pull arm fasteners
Fig. 18.3.11 Track end caps installed
1
1
1
Track end caps
1
2
3
Fig. 18.3.7 Track assembly
18.3.5 Attach track pivot pin to CPD lever.
1. Remove fixing piece from one end of
track.
2. Remove slide shoe/pivot pin assembly.
3. Position slide shoe/pivot pin under CPD
lever mounting hole.
4. Thread pivot pin M8 SHCS into CPD lever
mounting hole.
5. Use 6 mm hex key to tighten.
NOTICE
M8 SHCS tightening torque.
Use torque wrench (25 ft-lbs) to
tighten SHCS to 5.9 - 7.4 ft-lb
[8 - 10 Nm].
18.3.6 Install track onto slide shoe/pivot
pin assembly.
1. Slide track onto slide shoe.
2. Reinstall fixing piece assembly.
18.3.7 Attach track assembly to door.
1. Rotate track assembly to door
(Fig. 18.3.10).
2. Fasten track to door using fasteners
selected in Para. 18.3.4.
NOTICE
Check track for level.
Check track for level as fasteners
are tightened.
18.3.8 Attach end caps.
1. Attach end caps to track.
18.3.9 Door closer adjustments.
Reference Chapter 19.
1
Track
3
Fixing piece
9
Slide shoe
12
Bumper
16
Bumper stop
17
M5 x 13 FHMS
cross recessed
1
9
12
3
3
16
17
