31
ED100LE
02-2021
DL4616-001
dormakaba ED100LE operator – Fine cover
Installation Instructions
Chapter 10
10.4 Install hardware into track
10.4.1 Assemble track.
CAUTION
Assemble track hardware based
on RH or LH installation.
1. Remove both end caps (2) and one fixing
piece (3) from track.
1. Slide bumper stop (16), bumper (12) and
slide shoe assembly (9) into track.
• Do not tighten bumper stop M5 screw (17).
2. Secure fixing piece to end of track with
M5 x 15 screw (3.1).
• Use No. 2 Phillips, do not over-tighten.
Fig. 10.4.1 RH track assembly
1
Track
3
Fixing piece
9
Slide shoe
12
Bumper
Fig. 10.4.2 LH track assembly
1
Track
3
Fixing piece
9
Slide shoe
12
Bumper
16
Bumper stop
17
M5 x 13 FHMS
cross recessed
1
9
12
3
3
1
2
2
16
17
3
3
12
9
1
2
2
16 17
16
Bumper stop
17
M5 x 13 FHMS
cross recessed
10.5 Assemble slide shoe
Fig. 10.5.1 Slide shoe and pivot pin
8
Slide shoe
9
1/2" pivot pin
10
1" Pivot pin
11
Retaining ring
8
9
11
10
10.5.1 Assemble slide shoe.
1. Insert pivot pin into slide shoe.
2. Install spring clip into pivot pin slot.
