Configuration
Technical Manual
105
V28 - 08/2019
Electronic safe lock
2.
Press the ENTER key.
3.
It is displayed when the current time is activated (ON) or deactivated (OFF).
4.
Select either ON or OFF by using the LEFT or RIGHT arrow key.
5.
Press the ENTER key to confirm the setting.
6.
Select "YES" in the "SAVE?" dialog by using the LEFT or RIGHT arrow key.
7.
Press the ENTER key to confirm the setting.
15.1.9.18
Setting the Wake Up Mode in Mixed Mode
With this function it is possible to set the safe lock to Wake Up Mode either in OTM or Bank
Mode.
This setting is selected via AS284-USBW or AS284-NETW programming software.
The default setting is in Bank Mode.
15.1.9.19
Setting the Freeze function
15.1.9.19.1
Setting Freeze Off
The lock with the lowest serial number will be lock -1- (the master lock). When the function
Freeze Off is activated, further devices (locks, eBoxes or input units) will be searched and con-
nected automatically to the lock list.
When the eBox is connected to the safe lock system, the eBox will be automatically paired
with lock -1-.
If a further eBox is connected to the safe lock system, the lock ignores the inputs of the eBox.
When entering the Device Manager, the respective eBox is marked with an exclamation mark.
With each power cycle the automatic pairing will be newly realized.
If more than 15 locks are connected to the safe lock system, the error message ERROR -16-
will be displayed.
Authorization: Master Code
1.
Select the submenu FREEZE on the master lock.
2.
Press the ENTER key.
3.
Select OFF by using the LEFT or RIGHT arrow key.
4.
Press the ENTER key to confirm the setting.
5.
Select "YES" in the "SAVE?" dialog by using the LEFT or RIGHT arrow key.
6.
Press the ENTER key to confirm the setting.
