Operating & Maintenance Manual
Operating Instructions
32
During raising and lowering tower, ensure there is no one behind the machine in the area of
the tower. Ensure there is no obstruction overhead within forty feet. Before operating the
winch, inspect the cable for damage. Replace damaged cables immediately. When operating
the winch, do NOT overcrank when cable is tight. This will damage cable. Do not continue
cranking winch when cable becomes loose. This will enable the cable to unwind from winch
drum causing kinks and knots.
WARNING
!
Damaged cables may break during tower operation allowing the tower to
fall. Do not operate tower with damaged cables. Replace damaged cables
immediately.
WARNING
!
Hazards may exist on the jobsite should this unit shut down
automatically and all lamps be extinguished. Personnel should be
advised of the possibility and have additional lighting.
Before Starting
Check the following:
1. Engine oil level. Add as required.
WARNING
!
Do not remove the pressure cap from a HOT radiator. Allow radiator to
cool before removing pressure cap.
2. Engine coolant level. Add as required.
3. Fuel filter. Drain any accumulation of water. Clean or replace element as
required.
4. Air cleaner service indicator (if equipped). Service when showing red.
Summary of Contents for L6-60HA-T4F
