Doosan L6-60HA-T4F, Operation And Maintenance Manual

Page: 16 / 50

Operating & Maintenance Manual Safety
16
Safety Chains
Ensure the breakaway cable is securely coupled to the unit and also to a substantial anchor
point on the towing vehicle.
Ensure the cable length is as short as possible, while still allowing enough slackness for the
unit to articulate without the handbrake being applied.
Loop the chains onto the towing vehicle using the towing vehicle hitch as an anchor point, or
any other point of similar strength.
Ensure the effective chain length is as short as possible while still allowing normal articulation
of the unit and effective operation of the breakaway cable.
Welding
Prior to any welding on the unit, disconnect any control box connections and battery cables.
Open all circuit breakers and remove any external connections (except grounding rod, if
applicable). Connect the welding ground as close as possible to the area being welded.
Decals
Decals are located on the machine to point out potential safety hazards. Read and
follow these instructions. If you do not understand the instructions, inform your
supervisor.
Note there are different decal headings:
DANGER
!
(Red Background)
Indicates the presence of a hazard which WILL cause serious injury,
death, or property damage if ignored.