Operating & Maintenance Manual
Operating Instructions
34
NOTE:
WARNING
!
Electrical power is present upon cranking engine.
4. Immediately move Rotary Switch to START position.
NOTE: Do NOT crank for more than 15 seconds without allowing starter
to cool for 30 seconds. If engine does not start after a few attempts, refer
to Troubleshooting Section in this manual.
5. Release Rotary Switch after engine continues to run.
6. Allow the engine to warm-up for 3 to 5 minutes. If the engine stops
unexpectedly, refer to Troubleshooting Section in this manual.
7. Lamp Switches and Receptacles may now be used.
NOTE: Keep side doors closed for optimum cooling of unit while running.
Stopping
1. Shut down or unplug (at receptacles) all external loads.
2. Place all LAMP Switches to OFF position.
3. Move Rotary Switch to OFF position.
Summary of Contents for L6-60HA-T4F
