Doosan DX225LC, Manual

Page: 45 / 136

Electrical System SP000935
Page 44
A. Current failure information
Current status of failure is displayed (Failure code,
failure contents).
When several failures are produced, failure
information can be checked using "UP" (
, 1 on
Figure 24) or "DOWN" ( , 2 on Figure 24) button.
* 1/2: A serial number of current failure/ total quantity
of failure.
* Vxxx-xx: Vxxx is a unique code and xx is a FMI
(Failure Mode Identifier) number.
- V: Machine related failure code
- E: Engine related failure code
Refer to the failure information code for unique codes
and FMI numbers.
This example shows one of two failures.
B. Past failure information
Memorized record of past failure is displayed (Failure
code, failure contents).
When several failures are produced, failure
information can be checked using "UP" (
, 1 on
Figure 24) or "DOWN" ( , 2 on Figure 24) button.
NOTE: " Number: xxx ": "xxx" means that the
totally counted number of the same failure.
" Period:xxxxxHrxxm ": It indicates the
period for which machine has operated
until a failure takes place. (For more than
two occurrences of the same failure, until
the first occurrence time.)
C. Failure record deletion
This mode is used to delete the memorized record of
past failure. If this mode is selected, all records will be
deleted.
When "YES" ( , 3 on Figure 24) button is pressed,
the memorized record will be deleted.
At this time, deletion signal will be displayed and the
screen will move to previous menu after deletion.
This screen will be displayed during 3 seconds.
R E A LT I M E FA I L
: UP : DOWN
FG000565
1/2 CODE : V204-05
2/2 CODE : E011-04
Relief Pressure Up S/V
Current below normal (CURRENT
BELOW NORMAL or open circuit)
Figure 34
FA I L U R E L O G
: UP : DOWN
FG000566
1/2 CODE : V204-05
2/2 CODE : E011-04
Period:00254Hr 29m Number:08
Relief Pressure Up S/V
Current below normal (CURRENT
BELOW NORMAL or open circuit)
Figure 35
DELETE FAIL LOG
ESC: No
FG000567
: Yes
All Fail Log will be
DELETED.
Figure 36