Doosan DX225LC, Manual, Page: 107 / 136

Electrical System SP000935
Page 106
Error codes
NOTE:
The position error means that it fails to move to
designated place in 40 seconds.
Sun sensor displays E8 in case of no sunlight.
2 and more fails: Codes concerned blinks twice at a
time.
Ambient Temperature Display
Selection of both the SEL and MODE switch for more than 3
seconds indicates the ambient temperature in the set
temperature display department.
- Range of temperature display: -40 - +60°C
NOTE:
Display of ambient temperature may be released in
the same way for its entry way.
It returns automatically to default mode 5 seconds
after entering the ambient air temperature display
mode.
Code Description
E0 Normal
E1 Internal air temperature sensor short
E2 Internal air temperature sensor open
E3 Ambient air temperature sensor short
E4 Ambient air temperature sensor open
E5 Duct sensor short
E6 Duct sensor open
E7 Sun sensor short
E8 Sun sensor open
E9 Water temperature sensor short
E10 Water temperature sensor open
E11 D.P.S open
E12 Position error of wind direction actuator
E13 Position error of temperature control actuator
0.5
E1 E1 E2 E2 E3
0.5
FG001067
Figure 90