dooch Q-Drive NQ-0075-S, User Manual, Page: 54 / 80

[CHAPTER 6 FUNCTION TABLE & DESCRIPTION]
6-10 |
DOOCHPUMP
Setup Data Functional Description
1~250(Factory Setting) If the number of data request protocol is
different, data is not transmitted.
Pr-42 485 comm. speed
Pr-41 485 comm.
ㆍ
485 comm. speed set up
ㆍ
It setsup 485 comm. ID set up
Setup Data Functional Description
1~9999(msec) When receive data request protocol, data transmit
after set up delay time(Factory set up : 5[msec]
Pr-43 485 comm. delay time
ㆍ
485 comm. delay time set up
Setup Data Functional Description
1200kbps 1
2400kbps 2
4800kbps 3
9600kbps 4(Factory Setting)
19200kbps 5
Pr-50 CAN Communication Mode
ㆍ
It set up for multi-drive control, when each drive has different version
*
Available for version 1.3x. Please refer version check page
*
When set up for 0(NQ Ver 1.2x), the Pr-53 alteration automatically changed to 0(in order of ID)
Setup Data Functional Description
NQ Ver 1.2x 0(Factory Setting)
NQ Ver 1.3x 1
Pr-51 Communication ID Setup
ㆍ
It is CAN Communication ID on Multi-Drive control mode.
ㆍ
Be sure to not duplicate ID for setup.