dooch Q-Drive NQ-0075-S, User Manual, Page: 4 / 80

[SAFETY PRECAUTIONS]
2 | DOOCHPUMP
ㆍ
Do not open cover during powered state or operation.
(Exposed high voltage terminals or charging part of DC voltage may
cause electric shock.)
ㆍ
Do not open cover even when power is not supplied except for
wiring or inspection work.
(When the power is turned off, charged DC voltage in charging part
of drive may cause electric shock.)
ㆍ
During wiring work or regular inspection, cut off the power and
check with tester if DC voltage is discharged after elapsed
more than 10 minutes.
(It may cause electric shock. Execute work when charging voltage
of DC part is DC 30V or less.)
ㆍ
Do not operate the switch or drive with wet hands.
(It may cause electric shock.)
ㆍ
When any part of drive input or cable jacket is damaged,
do not apply electricity or operate the equipment.
(It may cause electric shock.)
ㆍ
Do not put over stress on the input/output power cable or
signal wires of the drive with heavy object.
(It may damage on the cable jacket to cause electric shock.)
ㆍ
Do not install the equipment near the inflammable materials.
(Installation on or near the inflammable materials may cause fire.)
ㆍ
When drive has any fault, cut off the input power.
(If not, it may cause fire due to consequent accident.)
ㆍ
Do not touch the drive during powered state or several minutes
after power is turned off.
(Since drive has high temperature after operation, body contact
may cause burn.)
ㆍ
Do not input power for the drive with damaged product and
part even if installation is completed.
(It may cause electric shock.)
ㆍ
Do not leave any damageable objects from inside of drive, such
as screw, metal, water, oil, etc.
(It may cause fire.)