Donner DEK-610P, Owner'S Manual

Page: 6 / 104

03
External Function
1.DC12V socket
2.Line out socket
3.Headphone socket
4.Sustain pedal out socket
5.USB MIDI function socket
6.MP3 function socket
THE PREPARATION BEFORE PERFORMANCE
Power Requirement
1.Use power adaptor
Please use the special power adaptor that
was equipped with this electronic
keyboard, Insert the DC plug of power
adaptor into the DC socket of electronic
keyboard, then, insert the other end into
Mains socket, finally turn on power
switch and start performance.
Caution:
When you don't use this electronic
keyboard, you should pull out the plug of
power adaptor from power socket safely
to avoid the parts trouble or other
accident for long-term charging.
12V power
Power Adapter
Mains socket
DC Plug
2.Use batteries
Open the battery lid at the bottom of
electronic keyboard and load 8 pcs 1.5V
size 1 batteries, ensure the polarity of
the batteries should conform to the
anode and cathode direction of
batteries marked in battery internal
slot.
Cover the battery lid after the
installation.
Caution:
Please replace all batteries at one time
when the batteries need the replacement.
Don't use different kinds of batteries and
mix new and old batteries for use at the
same time.
Please take out the batteries as to avoid
possible damage caused by the batteries
leakage if you don't use the electronic
keyboard for long time.
total 8 pcs
Accessories socket
1.Use headphone
Insert headphone plug into
[HEADPHONE] socket in back of
electronic keyboard.
The internal speaker system of
electronic keyboard cuts off
automatically now.
HEADPHONE