Donaldson Torit WSO 10, Installation And Operation Manual

Page: 6 / 40

Donaldson Company, Inc.
6
CAUTION!
OSHA may have requirements regarding
recirculating filtered air in your facility.
Consult with the appropriate local
authorities to ensure compliance with all
codes regarding recirculating filtered air.
Inspection on Arrival
1. Inspect unit on delivery.
2. Report any damage to the delivery carrier.
3. Request a written inspection report from the
Claims Inspector to substantiate claim.
4. File claims with the delivery carrier.
5. Compare unit received with description of
product ordered.
6. Report incomplete shipments to the delivery
carrier and your Donaldson representative.
7. Remove crates and shipping straps. Remove
loose components and accessory packages
before lifting unit from truck.
Installation Codes and Procedures
Installation
Site Selection, Grade-Mounted Units
1. The unit can be located on a reinforced concrete
foundation.
2. Provide clearance from heat sources and
interference with utilities when selecting the
location.
3. Prepare the foundation in the selected location.
Install anchor bolts to extend a minimum of 1
1/2-inches above foundation unless otherwise
indicated on the Specification Control drawing.
4. Locate the collector to ensure the shortest and
straightest inlet- and outlet-duct length, easy
access to electrical connections, and routine
maintenance.
1. Safe and efficient operation of the unit depends
on proper installation.
2. Authorities with jurisdiction should be
consulted before installing to verify local codes
and installation procedures. In the absence of
such codes, install unit according to the
National Electric Code, NFPA No. 70-latest
edition.
3. A qualified installation and service agent must
complete installation and service of this
equipment.
4. All shipping materials, including shipping
covers, must be removed from the unit prior to,
or during unit installation.
Note: Failure to remove shipping materials
from the unit will compromise unit
performance.
CAUTION!
Ensure weight of oil-laden unit plus weight
of required materials and equipment will
be adequately supported. Failure to
comply may result in personal injury
and/or property damage.