Donaldson Torit WSO 10, Installation And Operation Manual

Page: 18 / 40

Donaldson Company, Inc.
18
CAUTION!
The collector has a high center-of-gravity
and may overturn if not secured
properly.
• Secure the collector to the lifting
device.
• Use care when moving the unit.
Floor Mount Stand Installation, WSO 20 shown
CAUTION!
The collector has a high center-of-gravity
and may overturn if not secured properly.
Secure the collector properly.
filter
cabinet
inlet
hopper
eye bolt
foundation
anchor bolt
leg
Spreader Bar
Lifting Detail
angle not to exceed
30° from vertical
(minimum 60°
from horizontal)
Eyebolt Lifting Angle
clevis pin
eyebolt
spreader
bar
WSO 20 Floor Mount Stand Installation
1. Prepare the foundation in the selected location.
Install customer-supplied anchor bolts to extend
a minimum of 1 1/2-in above foundation.
Anchor bolt pattern and recommended anchor
bolt specifications are shown on the
specification control drawing.
2. Using a crane or forklift, raise the WSO 20
collector and lower into position onto anchor
bolts. Level unit and secure all hardware.
Note: When using a crane, use clevis pins and a
sling attached to four eyebolts.
3. Remove crane or forklift.