Donaldson Torit WSO 10, Installation And Operation Manual

Page: 10 / 40

Donaldson Company, Inc.
10
Standard Equipment
General Installation
1. Apply a generous amount of sealant when
installing attachments.
2. Position the collector above the mist-capture
zone. See Collector Positioning.
3. Do not allow a fluid trap to form when using
flexible duct. See Flex-Duct Positioning.
4. On enclosed-machine installations, mount the
unit as far from the mist throw zone as possible
and away from the primary access door to
maximize filter life and provide effective mist
containment. See Enclosed-Machine Installation
illustration.
5. On open-machine installations, position the
unit's pick-up hood a minimum of 12-in from
the mist source. Avoid mounting the pick-up
hood too close to the mist source of an open
machine such as a wet surface grinder. Installing
too close can shorten filter life as the unit will
collect large droplets and particulate instead of
mist. See Open Machine Installation.
machine
center
Correct
Incorrect
machine
center
fluid trap
Flex-Duct Positioning, WSO 15 shown
machine
center
Correct Incorrect
machine
center
Collector Positioning, WSO 15 shown