EN
8
BIOCLASS iC 66
2
INSTALLATIONS INSTRUCTIONS
The boiler must be installed by personnel authorised by the Ministry of Industry, in compliance with the
applicable laws and regulations.
This boiler is suitable for heating water to a temperature below boiling point at atmospheric pressure. It
must be connected to a heating installation and/or a domestic hot water distribution network, which must
always be compatible with its performance and power.
This appliance must only be used for the purpose for which it has been expressly designed. Any other use
is considered unsuitable and therefore hazardous. The manufacturer shall not be considered liable under
any circumstances for damage caused by unsuitable, erroneous or irrational use.
Remove all the packaging and check the contents are complete. In case of doubt, do not use the boiler.
Contact your supplier. Keep the packaging elements out of reach of children, as they can be dangerous.
Be aware that the base of the boiler is fixed to the wooden pallet with four screws.
When you no longer wish to use the boiler, disable the parts that could be a potential source of hazard.
2.1
Location
The boiler must be installed in a sufficiently ventilated site, away from humidity. It must be located so
that the air grilles on the premises are not obstructed and normal boiler maintenance is possible even
if it is placed between items of furniture. One metre of free space must be left above the boiler for this
purpose.
If you want to connect the boiler with the
iConnect
Internet platform or register it in the
iConnect
user application, it will also be essential to have
coverage of the home's Wi-Fi network
in the place
where the boiler is located.
You must maintain the minimum distances to the surrounding components:
a
b
c
d
e
a = mín. 500 mm.
b = mín. 500 mm.
c = mín. 1000 mm.
d = mín. 500 mm.
e = mín. 2500 mm.
