41
BIOCLASS iC 66
Nº. Parameter
Display
8
Ashtray empty warning function.
9
Manual setting of feed auger calibration.
10 Registration of the boiler in
iConnect
.
11
Screen contrast setting.
(*)
When the boiler is registered in
iConnect
, these settings will be adjusted through the app.
IMPORTANT: It is strongly recommended that the user activate the "Ashtray emptying
warning" function (see point 5 of the configuration menu and paragraph
11.6), to avoid a malfunction of the boiler due to premature fouling and a fire.
11.1
Timers programming process
BioClass iC 66
boiler allows setting 3 different timers: boiler timer, Fuel suction system timer (if there
is any connected) and DHW recirculation pump timer (if this function is activated on the
“Technical
Menu”)
. The default setting for the timers is disabled ("
- - - -
"), so the functioning that is regulated by
each timer will operate 24 hours. The programming process is the same for any timer.
In turn, each of the heating zones that may have been installed in the boiler (up to a maximum of 3
zones) can have their own time programming if they have a room sensor connected. By default, the
boiler comes with the heating time schedule disabled (the digits "
- - - -
" are displayed on the
programming screen), that is, the user will manually adjust the desired temperature setpoint at each
moment of the day using the corresponding screen of the "User" menu.
The adjustment process, described below, will be the same for any of the time schedules mentioned
above. Once the time programming to be adjusted has been selected by pressing
, it is accessed
and SET will light up flashing, starting the adjustment process.
If a heating time schedule is selected, first go to the settings screens of the room temperature setpoints
applied during the scheduled periods of "Comfort" temperature ( ) and the periods of "Reduced"
temperature ( ). Touch the "
+
" or "
-
" heating symbols
(18)
to select this temperature: