EN
MSH 300, MSH301
Installing the seat heater
17
Installing the heating element for the seat surface
➤
Insert the heating element for the seat surface between the cover fabric and the
foam core of the seat (fig.
b
, page 5).
➤
If anchoring grooves are present, make sure that the cut-out sections are
positioned over the anchoring grooves (fig.
c
, page 5) and place the heating
elements in the anchoring grooves.
➤
Fasten the heating element using double-sided adhesive tape to prevent it
sliding on the foam core.
Ensure that no creases or kinks form.
Installing the heating element for the backrest
A
➤
Open the lower area of the backrest cover (fig.
d
, page 5).
➤
Push the heating element into the gap between the seat cover and the seat
cushion (fig.
e
, page 5).
➤
Fasten the heating element using double-sided adhesive tape to prevent
creases.
Installing the seat
➤
Reassemble the backrest and seat.
➤
Lift the seat into the vehicle.
➤
Secure the vehicle seat with the fastening screws.
NOTICE!
If the seats are equipped with side airbags, then there is a
predetermined breaking point in the cover fabric. The seat cover must
therefore not be pulled tightly or slip out of place.
MSH300--IO-16s.book Seite 17 Donnerstag, 13. Juli 2017 10:28 10
